Lifting Bails
Lifting bails(bells), Lifting subs or Lifting Swivels are used for lifting drill pipe into the hole, bringing in a single from the rack or removing and lifting pipe or casing when tripping.

Features:
- Lightweight – made from Aluminium
- Approximately 50% weight reduction in comparison with standard steel design
- Compliant with Australian Standards of Lifting Devices
- Engineer-certified WLL
Thread Connections and Sizes:
Lifting bails can be built with any popular threads in market, including API, BECO, CUBEX, DIBH, METZKE, REMET, MATRIX, etc.
The table below gives a range of thread configurations available. Others are available upon request.
Threads for Blast Hole Drilling | |
---|---|
API(REG/IF) | 2-3/8", 2-7/8", 3-1/2", 4-1/2", 5-1/2", 6-5/8", 7-5/8", 8-5/8" |
BECO | 3", 3-1/2", 4", 4-1/2", 5-1/4", 6", 8" |
CUBEX | #21, #24, #28 |
DIBH | 3-1/8", 3-1/2", 4-1/8" |
Threads for Reverse Circulation Drilling | |
---|---|
REMET | 3", 3-1/2", 4", 4-1/2" |
METZKE | 4", 4-1/2" |