The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling. It is convenient to break the hammer threads on the rig, but if the threads cannot be loosened or tend to get stuck, a breakout bench is the solution.
This handy but powerful breakout bench can easily be placed in a workshop or container and it breaks DTH hammers between 3" and 10". Select the right breakout bench depending on voltage and power source.
|Technical Data: rpm of chain less than 10tums/m Velocity of piston rod 1.8 meter/m|
|Hammer Range||Overall dimensions|
|Weight||Maximum assembly torque|
|Mazimum disassembly torque||Operating Height||Hydraulic Range||Power|
|81KN*m(60ftlb)||800mm||0-20Mpa||3KW, 220V, 50Hz|